How to make a gutter cleaner from a leaf blower?

Cleaning your gutters is not always an easy task and people won’t like that much always. It’s messy and has a lot of smell giving us an unpleasant feeling. Accumulated leaf, twig and nut debris make gutters useless for moving water away from the house. Keeping gutters clean means no more water pouring down over doors and windows or shrubs and soil close to the walls being pummelled by falling sheets of water. Getting the debris out means usually going along with a ladder and removing handfuls one at a time or using a water hose attachment to try to blast out the blockage. Using a leaf blower, however, can be an effective gutter cleaning device and more portable than a long hose attached to a spigot. Lets dig deep about how to make a gutter cleaner from a leaf blower.

Why should you clean your gutter occasionally?

Gutters are an integral piece of your home’s well-being. They serve to control the flow of rainwater to protect your roof, walls, foundation and landscape. But when neglected, experts say, gutters can turn from a necessity to a nightmare. A gutter clogged with leaves, sticks and other debris can cause a leaky roof or water damage to the interior or exterior of your home. Here is why it’s important to clean the gutter occasionally.

Prevent water damage: When gutters and downspouts are blocked with leaves and debris, rainwater may not drain properly. As water overflows from gutters, it can cause water damage on both the interior and exterior of your home. 

Protect your roof: Clogged gutters give rainwater nowhere to run. When water continues to flood over, it can leave rotten or a leaky roof in its wake.

Keep pests from causing trouble: Gutters clogged with leaves can make desirable homes for rodents, birds, and insects. The last thing you want is a pest infestation in your home!

Reduce the risk of a cracked foundation: When water is blocked from travelling away from your home, it can pool around the foundation of your house. This water can crack your foundation when it expands and freezes in the winter months.

Save your money: Gutter and downspout cleaning can help prevent unexpected and expensive projects down the road. Taking preventive measures now can help minimize the likelihood of having to repair or replace your roof.

Steps to make the gutter cleaner

It doesn’t matter what kind of leaf blower you use – gas leaf blowers or backpack leaf blowers are usually the most powerful and will work well, but battery-powered leaf blowers or corded electric leaf blowers will work well too.


The first thing we need is a flexible hose and this thing is an essential accessory in our home. These hoses are made of sturdy industrial-grade plastic and perfect for outdoor work. The hose comes with a large-mouth fitting for attaching to the vacuum cleaner. Adapting this hose to a leaf blower will make a great flexible all-in-one device for getting up and over into the gutter. Start by removing the attached extension from your leaf blower. These usually have a twist-and-pull mechanism.


Once removed, check the diameter of the blower throat and the hose fitting. If the hose fits over or in the throat, secure with a length of disposable duct tape. If the hose is the same diameter as the throat, though, then a little adaptation is necessary. Cut off the extension coupling from the hose with a sharp utility knife or a power cutter of any sort. There is now a flange the diameter of the fitting. Reduce the diameter until there is a snug fit inside the leaf blower throat. Once making the fit, secure it with duct tape. This procedure means sacrificing the hose for leaf-blower use only in the future and it cannot be used again, but purchasing a hose for just this purpose is relatively inexpensive.


Now the gas-powered motor will blast air directionally and makes standing on a ladder and reaching down into the gutter easier. Plus, the hose attachment means cleaner, longer swaths of the gutters at one time than just the distance of your arm’s length. Also, with the blower attachment, you won’t have to put your hands in the muck that builds up with wet leaves. The one safety precaution is to be sure to wear eye protection when using any power tool while on a ladder or in a high place. Reacting suddenly to something in the eye can lead to serious accidents.

Tips to use the gutter cleaner

Now you know how to make a gutter cleaner, here are some tips that would be useful while using a gutter cleaner.

Choose the right kit: Even though we can’t use any leaf blower as a gutter cleaner, it’s better to choose the right one.  Choose the blower which could be capable of producing a certain minimum air volume ( or a certain airspeed so that it could clean the gutter.

Use proper gears: When you blow leaves out of your gutter, you’re going to send debris flying every which way. Not only that; you’ll also be using a loud piece of power equipment that can potentially damage your hearing. Before starting to clean, make sure you’re wearing the proper safety gear:

  • Safety glasses or eye protection
  • Earplugs or hearing protectors
  • A respiratory mask 

Be Prepared for Wet and Dry Debris: If it’s been a while since you’ve cleaned your gutters, or it’s rained recently, and you find wet leaves and mud at the bottom of your gutters, first clear the dry debris with your leaf blower. Then, use a hose or a pressure washer on a low setting to clear the wet debris.


Cleaning your gutters is always important and leaf blowers could be a better option to help. Select the exact leaf blower when you are going to make a gutter cleaner with a blower. Keep your surroundings clean and beautiful, buy a better leaf blower now!